Note that for more formal bug reports or todo items, you can also edit the
[[bugs]] and [[todo]] pages.
-# Installation/Setup questions
-
-I have just installed ikiwiki and it works - at least I have the example index.mdwn page
-compiled and visible. However I have a few issues/problems:-
-
-* A couple of the 'optional' Perl modules aren't optional, you can't install ikiwiki without them,
-these are HTML::Template and HTML::Scrubber (at least I think it was these two, it's a bit messy
-to go back and find out).
-
-> You're right, HTML::Template is required. HTML::Scrubber is only required
-> in the default configuration, and is optional if the htmlscrubber plugin
-> is disabled. --[[Joey]]
-
-* I don't seem to have got an ikiwiki man page created.
-
-> It should be installed in /usr/share/man, or a similar directory
-> depending on how your perl is set up and how you did the install.
-> --[[Joey]]
+[[toc ]]
-> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki
-> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere
-> more sensible. [[Chris]]
-
-* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to
-my local settings. There are no errors but neither does anything get compiled. An ikiwiki
-command to explicitly do the compile works fine. Am I misunderstanding something here?
-
-> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild.
-> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything
-either though it was the command line I originally used to compile. After a long interval I 'touch'ed
-the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused!
-
-> ikiwiki only compiles files whose modification times have changed. It
-> should see any change made as close as a second after the last compile.
-> When run with --setup, ikiwiki always rebuilds every file in the wiki. If
-> --setup is not working, you must have it pointed at the wrong path or
-> something; you can pass -v to see what it's doing. I don't know why it
-> would not see recently changed files; you could try stracing it.
-> --[[Joey]]
-
-> OK, thanks, I don't quite know what was happening before but it seems to be working right now.
-> --[[Chris]]
-
->> Weird. I wish I knew what happened, but as it's working now, I'm
->> guessing some kind of user error was involved. --[[Joey]]
+# Installation/Setup questions
-* I wish there was a mailing list, much easier for this sort of stuff than this, apart from
-anything else I get to use a decent editor.
+Ikiwiki creates a .ikiwiki directory in my wikiwc working directory. Should I
+"svn add .ikiwiki" or add it to svn:ignore?
----
# Excellent - how do I translate a TWiki site?
>
> We will post the scripts as soon as we have them complete enough to convert our wikis.
>
-> -- Josh Triplett
+> -- [[JoshTriplett]]
>> Thanks for an excellent Xmas present, I will appreciate the additional
>> users this will help switch to ikiwiki! --[[Joey]]
----
-# OpenID
-
-I just figured I'd edit something on the page with my OpenID, since you've implemented it! --*[Kyle](http://kitenet.net/~kyle/)*=
-
-> Kyle, If you like openid, I can switch your personal wiki over to use your openid. --[[Joey]]
-
-----
-
-# ACL
-
-> Moved to [[todo/ACL]] --[[Joey]]
-
-----
-
-Some questions about the RecentChanges function. -- Ethan
-
-> (Moved to [[todo/recentchanges]] --[[Joey]])
-
-----
-
-Also, I'd like to request another template parameter which is just
-$config{url}. That way you won't have to hard-code the URL of the wiki into
-the template. -- Ethan
-
-> That's already available in the BASEURL parameter. --[[Joey]]
-
-----
-
-# Canonical feed location?
-
-Moved to [[todo/canonical_feed_location]] --[[Joey]]
-
-----
-
-# asciidoc or txt2tags ?
-
-Any plugins or support for using asciidoc or txt2tags as the wiki language and/or exporting to asciidoc or txt2tags?
-
-> No, but it should be quite easy to write such a plugin. The otl plugin
-> is a good example of writing a formatting plugin that uses an external
-> conversion program, like asciidoc or txt2tags. --[[Joey]]
-
-----
-
# LaTeX support?
-Any plugins or support for exporting to LaTeX?
-(If not could use asciidoc or txt2tags mentioned above to generated LaTeX.)
-
-> It's already [[been_requested|todo/latex]], although perhaps not
-> working the way you're thinking of. Noone is currently working on it.
-> --[[Joey]]
-
->> I did some tests with using Markdown and a customized HTML::Latex and html2latex
->> and it appears it will work for me now. (I hope to use ikiwiki for many
->> to collaborate on a printed book that will be generated at least once per day in PDF format.)
->>
->> --JeremyReed
-
->>> Have a look at [pandoc](http://code.google.com/p/pandoc/). It can make PDFs via pdflatex. --[[roktas]]
+Moved to [[todo/latex]] --[[Joey]]
----
# Using with CVS?
-Any examples of using ikiwiki with cvs?
-
-> No, although the existing svn backend could fairly esily be modified into
-> a CVS backend, by someone who doesn't mind working with CVS. --[[Joey]]
+Moved to a [[todo_item|todo/CVS_backend]]. --[[JoshTriplett]]
----
# Show differences before saving page?
-It would be nice to be able to have a button to show "Differences" (or "Show Diff") when
-editing a page. Is that an option that can be enabled?
-
-> It's doable, it could even be done by a [[todo/plugin]], I think.
-> --[[Joey]]
+Moved to the existing [[todo_item|todo/preview_changes]]. --[[JoshTriplett]]
----
Any setting for limiting how many kilobytes can be submitted via the "edit" form?
-- [[JeremyReed]]
-> Not currently. Worried about abuse? --[[Joey]]
-
->> I didn't want it abused accidently or with malice. I was thinking that Perl's CGI.pm would handle this, but I don't see that.
->> I read that textarea max bytes may be 500 lines or 28000 characters or 30000 characters or 64kB. It seems like it
->> varies and I didn't test myself, because I guess it may depend on different clients and different HTTP servers.
->> This could be checked using javascript on the client side (before submitting) and by checking size on server side (before saving). --[[JeremyReed]]
-
->>> The absolute limit varies by browser. If there are web servers that
->>> also limit it, I don't know of them. --[[Joey]]
-
-----
-
-# Disable sub-discussion pages?
-
-Moved to [[bugs]] -- [[Joey]]
+>>> See [[todo/fileupload]] for an idea on limiting page size. --[[Joey]]
----
--[Mazirian](http://mazirian.com)
> Maybe, although it would need to take the critisism at
-> http://www.cs.tut.fi/~jkorpela/forms/accesskey.html into account.
+> <http://www.cs.tut.fi/~jkorpela/forms/accesskey.html> into account.
>> Thank you for that link. Given that the edit link is the first thing you tab to
>> in the current layout, I guess it isn't all that necessary. I have had a
It would be nice to be able to edit the stylesheet by means of the cgi. Or is this possible? I wasn't able to achieve it.
Ok, that's my last 2 cents for a while. --[Mazirian](http://mazirian.com)
-> I don't support editing it, but if/when ikiwiki gets file upload support,
+> I don't support editing it, but if/when ikiwiki gets [[todo/fileupload]] support,
> it'll be possible to upload a style sheet. (If .css is in the allowed
> extensions list.. no idea how safe that would be, a style sheet is
> probably a great place to put XSS attacks and evil javascript that would
----
-# Disable build/install requirement on PerlMagick
-
-Some installs of PerlMagick require X11. I tried to first disable using "img" by using "--disable-plugin img"
-in the Makefile. But still failed. My workaround was to remove "img" from the bundle in IkiWiki/Plugin/goodstuff.pm
-before building. What is the recommended way to install ikiwiki without "img" support? --[[JeremyReed]]
-
-> I've fixed this in svn so plugins in goodstuff can be disabled. --[[Joey]]
+# Should not create an existing page
-----
+This might be a bug, but will discuss it here first.
+Clicking on an old "?" or going to a create link but new Markdown content exists, should not go into "create" mode, but should do a regular "edit".
-# Documentation for banning users?
+> I belive that currently it does a redirect to the new static web page.
+> At least that's the intent of the code. --[[Joey]]
-The [[todo]] page says admins can ban users. Where is this documented? I search the source and found
-set\_banned\_users() which led me to the CGI "preferences" form for the admin. Now logged in as an admin (as defined in my setup configuration),
-I see the field for this. But no details on how to use it. From the source it appears to be a space-delimited list of usernames. (I didn't test yet.)
+>> Try at your site: `?page=discussion&from=index&do=create`
+>> It brings up an empty textarea to start a new webpage -- even though it already exists here. --reed
-Can you please provide a [[/banned_users]] documentation about "banning" users function linked from the [[Features]] page and maybe [[security]] page and linked from the "preferences" for the admin?
-(I don't do this myself as I am unsure about this and still reading the code about banning users.)
+>>> Ah, right. Notice that the resulting form allows saving the page as
+>>> discussion, or users/discussion, but not index/discussion, since this
+>>> page already exists. If all the pages existed, it would do the redirect
+>>> thing. --[[Joey]]
----
-# Documentation for locking pages?
+# User database tools?
-The [[features]] page, the [[todo]] page and the [[usage]] manual page say pages can be locked and only the admin can edit locked pages.
-Where is locking pages documented? ... A moment later, from searching source I found this is configured via the preferences for the admin
-and that links to [[pagespec]].
+Any tool to view user database?
-Can you please provide a [[/page_locking]] doc about locking pages linked from the [[features]] page and elsewhere? And have that link to [[pagespec]]?
-(I don't do this myself as I am unsure about this and still reading the code about locking pages.)
+Any tool to edit the user database?
-----
+> No, but it's fairly easy to write such tools in perl. For example, to
+> list all users in the user database:
-# RecentChanges should show path to wiki sub-pages?
+ joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $_ foreach keys %$userinfo'
+ http://joey.kitenet.net/
+ foo
-The RecentChanges only shows the final file name for the recently changes file,
-for example "discussion". It would be more useful to see "index/discussion"
-or the path to the sub-page. I think this is handled by the htmllink() routine.
+> To list each user's email address:
->> IMHO it's a good idea and I like it. Often I can see changes in
->> any discussion page, but I don't know without clicking the link
->> what discussion was changed.
+ joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $userinfo->{$_}->{email} foreach keys %$userinfo'
+
+ joey@kitenet.net
->> However, I can see one problem here. You can commit via command line
->> changes in many pages. It will be displayed ugly then, because probably
->> a width of the RecentChanges page will be greater then a width of
->> user's browser. I hate these pages. So I propose to display a list of
->> changed pages in a column, not in a row. --Pawel
\ No newline at end of file
+> Editing is simply a matter of changing values and calling Storable::store().
+> I've not written actual utilities to do this yet because I've only needed
+> to do it rarely, and the data I've wanted has been different each time.
+> --[[Joey]]
sipb-www / ikiwiki.git / blobdiff