X-Git-Url: https://sipb.mit.edu/gitweb.cgi/ikiwiki.git/blobdiff_plain/0d6590d65b41085bc7a3b5de55f0b59d2cb8c8fd..e8b41583718247119b8e8469f22c3ef7e8f48fb6:/doc/index/discussion.mdwn diff --git a/doc/index/discussion.mdwn b/doc/index/discussion.mdwn index d5db8ee01..23c49f968 100644 --- a/doc/index/discussion.mdwn +++ b/doc/index/discussion.mdwn @@ -5,54 +5,170 @@ Do so here.. Note that for more formal bug reports or todo items, you can also edit the [[bugs]] and [[todo]] pages. +[[toc ]] + # Installation/Setup questions -I have just installed ikiwiki and it works - at least I have the example index.mdwn page -compiled and visible. However I have a few issues/problems:- +Ikiwiki creates a .ikiwiki directory in my wikiwc working directory. Should I +"svn add .ikiwiki" or add it to svn:ignore? -* A couple of the 'optional' Perl modules aren't optional, you can't install ikiwiki without them, -these are HTML::Template and HTML::Scrubber (at least I think it was these two, it's a bit messy -to go back and find out). +> `.ikiwiki` is used by ikiwiki to store internal state. You can add it to +> svn:ignore. --[[Joey]] +> > Thanks a lot. -> You're right, HTML::Template is required. HTML::Scrubber is only required -> in the default configuration, and is optional if the htmlscrubber plugin -> is disabled. --[[Joey]] +Is there an easy way to log via e-mail to some webmaster address, instead +of via syslog? -* I don't seem to have got an ikiwiki man page created. +> Not sure why you'd want to do that, but couldn't you use a tool like +> logwatch to mail selected lines from the syslog? --[[Joey]] -> It should be installed in /usr/share/man, or a similar directory -> depending on how your perl is set up and how you did the install. -> --[[Joey]] +> > The reason is that I'm not logged in on the web server regularly to +> > check the log files. I'll see whether I can install a logwatch instance. -> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki -> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere -> more sensible. [[Chris]] - -* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to -my local settings. There are no errors but neither does anything get compiled. An ikiwiki -command to explicitly do the compile works fine. Am I misunderstanding something here? - -> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild. -> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything -either though it was the command line I originally used to compile. After a long interval I 'touch'ed -the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused! - -> ikiwiki only compiles files whose modification times have changed. It -> should see any change made as close as a second after the last compile. -> When run with --setup, ikiwiki always rebuilds every file in the wiki. If -> --setup is not working, you must have it pointed at the wrong path or -> something; you can pass -v to see what it's doing. I don't know why it -> would not see recently changed files; you could try stracing it. -> --[[Joey]] +---- + +# Upgrade steps + +I upgrades from 1.40 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration. +I had many errors like: + + /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink + BEGIN failed--compilation aborted at (eval 5) line 129. + +and: + + failed renaming /home/bsdwiki/www/wiki/smileys.ikiwiki-new to /home/bsdwiki/www/wiki/smileys: Is a directory + BEGIN failed--compilation aborted at (eval 5) line 129. + +Probably about six errors like this. I worked around this by removing the files and directories it complained about. +Finally it finished. + +> As of version 2.0, ikiwiki enables usedirs by default. See +> [[tips/switching_to_usedirs]] for details. --[[Joey]] + +>> I read the config wrong. I was thinking that it showed the defaults even though commented out +>> (like ssh configs do). I fixed that part. --JeremyReed + +My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt +me for a password but now just goes right into the "editing" mode. +The release notes for 2.0 say password auth is still on by default. + +> It sounds like you have the anonok plugin enabled? + +>> Where is the default documented? My config doesn't have it uncommented. + +The third problem is that when editing my textbox is empty -- no content. + +This is using my custom rcs.pm which has been used thousands of times. + +> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I +> fixed a bug that could result in the edit box always being empty back in +> version 2.3. The only other way it could happen is if ikiwiki does not +> have saved state about the page that it's editing (in .ikiwiki/index). + +>> Rebuilt it several times. Now that I think of it, I think my early problem of having +>> no content in the textbox was before I rebuilt the cgi. And after I rebuilt the whole webpage was empty. + +Now I regenerated my ikiwiki.cgi again (no change to my configuration, +and I just get an empty HTML page when attempting editing or "create". + +> If the page is completly empty then ikiwiki is crashing before it can +> output anything, though this seems unlikely. Check the webserver logs. + +Now I see it created directories for my data. I fixed that by setting +usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup +but I still have empty pages for editing (no textbox no html at all). + +> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]] + +>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-" +>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes). + +>>> You need to either figure out what your web server does with stderr +>>> from cgi programs, or run ikiwiki.cgi at the command line with an +>>> appropriate environment so it thinks it's being called from a web +>>> server, so you can see how it's failing. --[[Joey]] + +(I am posting this now, but will do some research and post some more.) + +Is there any webpage with upgrade steps? + +> Users are expected to read [[news]], which points out any incompatible +> changes or cases where manual action is needed. + +>> I read it but read the usedirs option wrong :(. +>> Also it appears to be missing the news from between 1.40 to 2.0 unless they dont' exist. +>> If they do exist maybe they have release notes I need? + +>>> All the old ones are in the NEWS file. --[[Joey]] + +--JeremyReed + +My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me. + +Also I forgot to mention that do=recentchanges works good for me. It uses my +rcs_recentchanges in my rcs perl module. + +The do=prefs does nothing though -- just a blank webpage. + +> You need to figure out why ikiwiki is crashing. The webserver logs should +> tell you. + +I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI. +I was hoping for some output. + +I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes +on changes to revision control modules. Has something changed? I will also look. + +> No, the rcs interface has not needed to change in a long time. Also, +> nothing is done with the rcs for do=prefs. + +>> Thanks. I also checked differences between 1.40 Rcs plugins and didn't notice anything significant. + +--JeremyReed + +Another Followup: I created a new ikiwiki configuration and did the --setup to +create an entirely different website. I have same problem there. No prompt for password +and empty webpage when using the cgi. +I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know. + +The only errors I see when building and installing ikiwiki are: + + Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66. -> OK, thanks, I don't quite know what was happening before but it seems to be working right now. -> --[[Chris]] + gettext 0.14 too old, not updating the pot file ->> Weird. I wish I knew what happened, but as it's working now, I'm ->> guessing some kind of user error was involved. --[[Joey]] +I don't use GNU gettext on here. -* I wish there was a mailing list, much easier for this sort of stuff than this, apart from -anything else I get to use a decent editor. +I may need to revert back to my old ikiwiki install which has been used to thousands of times (with around +1000 rcs commits via ikiwiki). + +--JeremyReed + +I downgraded to version 1.40 (that was what I had before I wrote wrong above). +Now ikiwiki is working for me again (but using 1.40). I shouldn't have tested on production system :) + +--JeremyReed + +I am back. On a different system, I installed ikiwiki 2.6.1. Same problem -- blank CGI webpage. + +So I manually ran with: + + REQUEST_METHOD=GET QUERY_STRING='do=create&page=jcr' kiwiki.cgi + +And clearly saw the error: + + [IkiWiki::main] Fatal: Bad template engine CGI::FormBuilder::Template::div: Can't locate CGI/FormBuilder/Template/div.pm + +So I found my version was too old and 3.05 is the first to provide "Div" support. I upgraded my p5-CGI-FormBuilder to 3.0501. +And ikiwiki CGI started working for me. + +The Ikiwiki docs about this requirement got removed in Revision 4367. There should be a page that lists the requirements. +(I guess I could have used the debian/control file.) + +I am now using ikiwiki 2.6.1 on my testing system. + +--JeremyReed ---- # Excellent - how do I translate a TWiki site? @@ -78,141 +194,162 @@ easily, perl is possible (but I'm not strong in perl). > > We will post the scripts as soon as we have them complete enough to convert our wikis. > -> -- Josh Triplett +> -- [[JoshTriplett]] >> Thanks for an excellent Xmas present, I will appreciate the additional >> users this will help switch to ikiwiki! --[[Joey]] ---- -# OpenID - -I just figured I'd edit something on the page with my OpenID, since you've implemented it! --*[Kyle](http://kitenet.net/~kyle/)*= - -> Kyle, If you like openid, I can switch your personal wiki over to use your openid. --[[Joey]] - ----- - -# ACL +# LaTeX support? -> Moved to [[todo/ACL]] --[[Joey]] +Moved to [[todo/latex]] --[[Joey]] ---- -Some questions about the RecentChanges function. -- Ethan +# Using with CVS? -> (Moved to [[todo/recentchanges]] --[[Joey]]) +Moved to a [[todo_item|todo/CVS_backend]]. --[[JoshTriplett]] ---- -Also, I'd like to request another template parameter which is just -$config{url}. That way you won't have to hard-code the URL of the wiki into -the template. -- Ethan +# Show differences before saving page? -> That's already available in the BASEURL parameter. --[[Joey]] +Moved to the existing [[todo_item|todo/preview_changes]]. --[[JoshTriplett]] ---- -# Canonical feed location? +# Max submit size? + +Any setting for limiting how many kilobytes can be submitted via the "edit" form? +-- [[JeremyReed]] -Moved to [[todo/canonical_feed_location]] --[[Joey]] +>>> See [[todo/fileupload]] for an idea on limiting page size. --[[Joey]] ---- -# asciidoc or txt2tags ? +# Access Keys + +Would anyone else find this a valuable addition. In oddmuse and instiki (the only other +wiki engines I am currently using, the edit, home, and submit link tags have an +accesskey attribute. I find it nice not to have to resort to the mouse for those +actions. However, it may not be something everyone appreciates. Any thoughts? +--[Mazirian](http://mazirian.com) -Any plugins or support for using asciidoc or txt2tags as the wiki language and/or exporting to asciidoc or txt2tags? +> Maybe, although it would need to take the critisism at +> into account. -> No, but it should be quite easy to write such a plugin. The otl plugin -> is a good example of writing a formatting plugin that uses an external -> conversion program, like asciidoc or txt2tags. --[[Joey]] +>> Thank you for that link. Given that the edit link is the first thing you tab to +>> in the current layout, I guess it isn't all that necessary. I have had a +>> a user complaint recently that Alt-e in oddmuse was overriding his access +>> to the browser menu. ---- -# LaTeX support? +# Editing the style sheet. -Any plugins or support for exporting to LaTeX? -(If not could use asciidoc or txt2tags mentioned above to generated LaTeX.) +It would be nice to be able to edit the stylesheet by means of the cgi. Or is this possible? I wasn't able to achieve it. +Ok, that's my last 2 cents for a while. --[Mazirian](http://mazirian.com) -> It's already [[been_requested|todo/latex]], although perhaps not -> working the way you're thinking of. Noone is currently working on it. -> --[[Joey]] +> I don't support editing it, but if/when ikiwiki gets [[todo/fileupload]] support, +> it'll be possible to upload a style sheet. (If .css is in the allowed +> extensions list.. no idea how safe that would be, a style sheet is +> probably a great place to put XSS attacks and evil javascript that would +> be filtered out of any regular page in ikiwiki). --[[Joey]] ->> I did some tests with using Markdown and a customized HTML::Latex and html2latex ->> and it appears it will work for me now. (I hope to use ikiwiki for many ->> to collaborate on a printed book that will be generated at least once per day in PDF format.) ->> ->> --JeremyReed +>> I hadn't thought of that at all. It's a common feature and one I've +>> relied on safely, because the wikis I am maintaining at the moment +>> are all private and restricted to trusted users. Given that the whole +>> point of ikiwiki is to be able to access and edit via the shell as +>> well as the web, I suppose the features doesn't add a lot. By the +>> way, the w3m mode is brilliant. I haven't tried it yet, but the idea +>> is great. ---- -# Using with CVS? +# Should not create an existing page -Any examples of using ikiwiki with cvs? +This might be a bug, but will discuss it here first. +Clicking on an old "?" or going to a create link but new Markdown content exists, should not go into "create" mode, but should do a regular "edit". -> No, although the existing svn backend could fairly esily be modified into -> a CVS backend, by someone who doesn't mind working with CVS. --[[Joey]] +> I belive that currently it does a redirect to the new static web page. +> At least that's the intent of the code. --[[Joey]] ----- +>> Try at your site: `?page=discussion&from=index&do=create` +>> It brings up an empty textarea to start a new webpage -- even though it already exists here. --reed -# Show differences before saving page? +>>> Ah, right. Notice that the resulting form allows saving the page as +>>> discussion, or users/discussion, but not index/discussion, since this +>>> page already exists. If all the pages existed, it would do the redirect +>>> thing. --[[Joey]] -It would be nice to be able to have a button to show "Differences" (or "Show Diff") when -editing a page. Is that an option that can be enabled? +---- -> It's doable, it could even be done by a [[todo/plugin]], I think. -> --[[Joey]] +# User database tools? ----- +Any tool to view user database? -# Max submit size? +Any tool to edit the user database? -Any setting for limiting how many kilobytes can be submitted via the "edit" form? --- [[JeremyReed]] +> No, but it's fairly easy to write such tools in perl. For example, to +> list all users in the user database: -> Not currently. Worried about abuse? --[[Joey]] + joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $_ foreach keys %$userinfo' + http://joey.kitenet.net/ + foo ->> I didn't want it abused accidently or with malice. I was thinking that Perl's CGI.pm would handle this, but I don't see that. ->> I read that textarea max bytes may be 500 lines or 28000 characters or 30000 characters or 64kB. It seems like it ->> varies and I didn't test myself, because I guess it may depend on different clients and different HTTP servers. ->> This could be checked using javascript on the client side (before submitting) and by checking size on server side (before saving). --[[JeremyReed]] +> To list each user's email address: ->>> The absolute limit varies by browser. If there are web servers that ->>> also limit it, I don't know of them. --[[Joey]] + joey@kodama:~/src/joeywiki/.ikiwiki>perl -le 'use Storable; my $userinfo=Storable::retrieve("userdb"); print $userinfo->{$_}->{email} foreach keys %$userinfo' + + joey@kitenet.net + +> Editing is simply a matter of changing values and calling Storable::store(). +> I've not written actual utilities to do this yet because I've only needed +> to do it rarely, and the data I've wanted has been different each time. +> --[[Joey]] ---- -# Disable sub-discussion pages? +# Spaces in WikiLinks? -Moved to [[bugs]] -- [[Joey]] +Hello Joey, ----- +I've just switched from ikiwiki 2.0 to ikiwiki 2.2 and I'm really surprised +that I can't use the spaces in WikiLinks. Could you please tell me why the spaces +aren't allowed in WikiLinks now? -# wiki\_file\_regexp and RCS ,v files +My best regards, -I have RCS ,v files in my source directory. But get many "skipping bad filename" warnings. +--[[Paweł|ptecza]] -Also I don't see wiki\_file\_regexp documented. Because it is used with $config{wiki\_file\_regexp} I assume it can be set in the ikiwiki.setup. -I added a comma to it in my IkiWiki.pm in the defaultconfig(). But that was wrong (so I reverted back), because then the ,v files were copied to my www tree. +> See [[bugs/Spaces_in_link_text_for_ikiwiki_links]] -What is the correct way to include ,v RCS revision files in my source tree without receiving the "bad" messages and without copying over to www tree? +---- --- [[JeremyReed]] +# Build in OpenSolaris? -> Add the ,v to the $config{wiki_file_prune_regexps} array. This is how we -> skip equivilant files from other revision control systems too. -> --[[Joey]]] +Moved to [[bugs/build_in_opensolaris]] --[[Joey]] ---- -# Textile Plugin +# Various ways to use Subversion with ikiwiki + +I'm playing around with various ways that I can use subversion with ikiwiki. + +* Is it possible to have ikiwiki point to a subversion repository which is on a different server? The basic checkin/checkout functionality seems to work but there doesn't seem to be any way to make the post-commit hook work for a non-local server? -It was trivial, but I put together a plugin that uses the Textile markup -language, which I find to be the most superior of the various options for -that sort of thing. Where or how do I submit it for inclusion? +> This is difficult to do since ikiwiki's post-commit wrapper expects to +> run on a machine that contains both the svn repository and the .ikiwiki +> state directory. However, with recent versions of ikiwiki, you can get +> away without running the post-commit wrapper on commit, and all you lose +> is the ability to send commit notification emails. -> You can post it to [[plugins/contrib]]. --[[Joey]] +* Is it possible / sensible to have ikiwiki share a subversion repository with other data (either completely unrelated files or another ikiwiki instance)? This works in part but again the post-commit hook seems problematic. ->> Thanks. I tried using the "Add new post" form there, but apparently made a [mess of things somehow](http://ikiwiki.kitenet.net/contrib/textile___40__third-party_plugin__41__.html). Sorry about that. +--[[AdamShand]] -How does one go about making a markup language added by means of a plugin, the default markup language. In other words, I would like the index page to be written in Textile. If I include a index.txtl (where txtl is the extension I have assigned to be handled by the textile plugin), ikiwiki will ignore it and make a new index.mdwn. \ No newline at end of file +> Sure, see ikiwiki's subversion repository for example of non-wiki files +> in the same repo. If you have two wikis in one repository, you will need +> to write a post-commit script that calls the post-commit wrappers for each +> wiki.