Revert "Let’s keep in 3DES for now, in case the KDC is rolled back"

[wiki.git] / doc / zephyr.mdwn

diff --git a/doc/zephyr.mdwn b/doc/zephyr.mdwn
index 9062eb0cfb2167cec262cfc1e74723c38ece6949..dacb3e755ea8e85a6542906304c1cdd84a462cd7 100644 (file)
--- a/doc/zephyr.mdwn
+++ b/doc/zephyr.mdwn
@@ -22,11 +22,11 @@ terminal. Some of these zephyr clients have become so widely used that
 there are users who do not know that there are other ways to send (and
 receive) zephyrgrams. This wiki will cover the traditional commands,
 typed at the athena% prompt, as well as the more common modern zephyr
 there are users who do not know that there are other ways to send (and
 receive) zephyrgrams. This wiki will cover the traditional commands,
 typed at the athena% prompt, as well as the more common modern zephyr

-client Barnowl.
+client BarnOwl.

 
 

-The information in this wiki about Barnowl just barely touches the
-surface.  More for in-depth functionality, visit the [Barnowl
-wiki](https://barnowl.scripts.mit.edu:444/wiki).
+The information in this wiki about BarnOwl just barely touches the
+surface.  More for in-depth functionality, visit the [BarnOwl
+wiki](https://barnowl.mit.edu/).

 
 ## Modern Zephyr
 
 
 ## Modern Zephyr
 


@@ -37,19 +37,20 @@ customize barnowl.
 
 ### Other Clients
 
 
 ### Other Clients
 

-There are other clients besides Barnowl, however their use is not
+There are other clients besides BarnOwl, however their use is not

 nearly as widespread.  Some of these include:
 
 nearly as widespread.  Some of these include:
 

-* Owl (unmaintained, Barnowl evolved from this)
+* Owl (unmaintained, BarnOwl evolved from this)

 * vt / jervt
 * zwgc (see TraditionalZephyr)
 * Pidgin
 * zephyr-mode for emacs
 * vt / jervt
 * zwgc (see TraditionalZephyr)
 * Pidgin
 * zephyr-mode for emacs

+* [ZephyrPlus web client](http://zephyrplus.xvm.mit.edu)

 
 

-Using Barnowl is recommended, as it is better supported and more
+Using BarnOwl is recommended, as it is better supported and more

 documentation exists for it.
 
 documentation exists for it.
 

-### Using Barnowl
+### Using BarnOwl

 You will need access to an Athena machine to run barnowl.  The easiest
 way to do this would be to SSH into linux.mit.edu.
 
 You will need access to an Athena machine to run barnowl.  The easiest
 way to do this would be to SSH into linux.mit.edu.
 


@@ -226,13 +227,13 @@ There might be some options that you want to be consistent from
 session to session; you don't want to have to set the same variables
 each time.  You can fix this by adding the commands to your "startup"
 file, for example, `.owl/startup`.  This can be done from within
 session to session; you don't want to have to set the same variables
 each time.  You can fix this by adding the commands to your "startup"
 file, for example, `.owl/startup`.  This can be done from within

-Barnowl, by using the `startup` command:
+BarnOwl, by using the `startup` command:

 
     :startup set foo bar
 
 Where `foo` is the variable you want to set, and `bar` is the value.
 You do not necessarily have to use the `set` command, either, any
 
     :startup set foo bar
 
 Where `foo` is the variable you want to set, and `bar` is the value.
 You do not necessarily have to use the `set` command, either, any

-command you can type in Barnowl can be added to the startup file.
+command you can type in BarnOwl can be added to the startup file.

 
 ### Logging
 
 
 ### Logging
 


@@ -268,9 +269,9 @@ profiles may have different shades of the seven colors.
 
 ### Filters
 
 
 ### Filters
 

-Some people like to customize their Barnowl by color-coding classes.
+Some people like to customize their BarnOwl by color-coding classes.

 This makes it easier to tell different classes apart (and minimize
 This makes it easier to tell different classes apart (and minimize

-mixing).  Barnowl has some already existing filters, for example,
+mixing).  BarnOwl has some already existing filters, for example,

 `personal` (for incoming personals), `out` (for outgoing personals),
 and `ping` (for pings).  To assign a color to a filter, add the
 following to your startup file:
 `personal` (for incoming personals), `out` (for outgoing personals),
 and `ping` (for pings).  To assign a color to a filter, add the
 following to your startup file:


@@ -280,11 +281,11 @@ following to your startup file:
 What if you want to color-code your class, or a friends class?  You
 can create and color filters with:
 
 What if you want to color-code your class, or a friends class?  You
 can create and color filters with:
 

-    filter johndoe class johndoe
+    filter johndoe class ^johndoe$

     filter johndoe -c blue
 
 You can update your settings and filters without restarting your
     filter johndoe -c blue
 
 You can update your settings and filters without restarting your

-Barnowl session by:
+BarnOwl session by:

 
     :source ~/path/to/config/file
 
 
     :source ~/path/to/config/file
 


@@ -295,9 +296,9 @@ all` or the keyboard shortcut `V` to see all messages again.
 For more detailed information on filters, visit
 [https://barnowl.scripts.mit.edu:444/wiki/Filters](https://barnowl.scripts.mit.edu:444/wiki/Filters).
 
 For more detailed information on filters, visit
 [https://barnowl.scripts.mit.edu:444/wiki/Filters](https://barnowl.scripts.mit.edu:444/wiki/Filters).
 

-## Running Barnowl in Screen
+## Running BarnOwl in Screen

 
 

-It can be very annoying to have to close Barnowl when you turn off
+It can be very annoying to have to close BarnOwl when you turn off

 your computer.  During the time your computer is off, you're missing
 many (possibly important) zephyrs.  It can be aggravating to be using
 zephyr via an unreliable network connection.  It can also be
 your computer.  During the time your computer is off, you're missing
 many (possibly important) zephyrs.  It can be aggravating to be using
 zephyr via an unreliable network connection.  It can also be


@@ -308,7 +309,7 @@ this?  These problems can be solved with the magic of screen.
 A more detailed and extensive explanation of this can be found at
 [http://web.mit.edu/kchen/arch/common/bin/owl-screen.txt](http://web.mit.edu/kchen/arch/common/bin/owl-screen.txt). Basic commands are [Ctrl-a] followed by [c] to open a new window (like a tab), [Ctrl-a][w] to see a list of open windows, and [Ctrl-a] followed by a number to go to that window.
 
 A more detailed and extensive explanation of this can be found at
 [http://web.mit.edu/kchen/arch/common/bin/owl-screen.txt](http://web.mit.edu/kchen/arch/common/bin/owl-screen.txt). Basic commands are [Ctrl-a] followed by [c] to open a new window (like a tab), [Ctrl-a][w] to see a list of open windows, and [Ctrl-a] followed by a number to go to that window.
 

-Do note that running `owl-screen` as apposed to just runnning `screen` and then a barnowl instance provides niceties such as reminders to renew your tickets (the process `/mit/kchen/arch/i386_rhel4/bin/cont-renew-notify`). Also, Barnowl will always be located on the `0` tab of an `owl-screen` instance, so [Ctrl-a][0] will always take you back to Barnowl.
+Do note that running `owl-screen` as apposed to just runnning `screen` and then a barnowl instance provides niceties such as reminders to renew your tickets (the process `/mit/kchen/arch/i386_rhel4/bin/cont-renew-notify`). Also, BarnOwl will always be located on the `0` tab of an `owl-screen` instance, so [Ctrl-a][0] will always take you back to BarnOwl.

 
 ### Screen
 
 
 ### Screen
 


@@ -333,7 +334,7 @@ window, and run
     kinit -l7d -54
 
 (length 7 days, both Kerberos 5 and Kerberos 4). Press C-a 0 to return
     kinit -l7d -54
 
 (length 7 days, both Kerberos 5 and Kerberos 4). Press C-a 0 to return

-back to your Barnowl window.
+back to your BarnOwl window.

 
 When you're ready to log out, press C-a d to "detach" your screen, and
 then type `exit` or `logout` to log out.  Later, when you want to
 
 When you're ready to log out, press C-a d to "detach" your screen, and
 then type `exit` or `logout` to log out.  Later, when you want to


@@ -350,7 +351,7 @@ the following commands:
     add kchen
     owl-screen
     C-a C-c
     add kchen
     owl-screen
     C-a C-c

-    kinit -l1d -r7d -54
+    kinit -l1d -r7d

 
 ### Attaching and Detaching Sessions
 
 
 ### Attaching and Detaching Sessions