websetup form display done

[ikiwiki.git] / doc / plugins / write.mdwn

diff --git a/doc/plugins/write.mdwn b/doc/plugins/write.mdwn
index b4acb237dd8a1f5612e34c136cd95823a152bcde..b31722dd7f7337479809a8ed6754afba01439a78 100644 (file)
--- a/doc/plugins/write.mdwn
+++ b/doc/plugins/write.mdwn
@@ -3,7 +3,7 @@ written to extend ikiwiki in many ways. Despite the length of this page,
 it's not really hard. This page is a complete reference to everything a
 plugin might want to do. There is also a quick [[tutorial]].
 
 it's not really hard. This page is a complete reference to everything a
 plugin might want to do. There is also a quick [[tutorial]].
 

-[[toc levels=2]]
+[[!toc levels=2]]

 
 ## Types of plugins
 
 
 ## Types of plugins
 


@@ -128,26 +128,34 @@ of a plugin.
 
         hook(type => "preprocess", id => "foo", call => \&preprocess);
 
 
         hook(type => "preprocess", id => "foo", call => \&preprocess);
 

-Replace "foo" with the command name that will be used inside brackets for
-the preprocessor directive.
-
-Each time the directive is processed, the referenced function (`preprocess`
-in the example above) is called, and is passed named parameters. A "page"
-parameter gives the name of the page that embedded the preprocessor
-directive, while a "destpage" parameter gives the name of the page the
-content is going to (different for inlined pages), and a "preview"
-parameter is set to a true value if the page is being previewed. All
-parameters included in the directive are included as named parameters as
-well. Whatever the function returns goes onto the page in place of the
+Replace "foo" with the command name that will be used for the preprocessor

 directive.
 
 directive.
 

-An optional "scan" parameter, if set to a true value, makes the hook be
-called during the preliminary scan that ikiwiki makes of updated pages,
-before begining to render pages. This parameter should be set to true if
-the hook modifies data in `%links`. Note that doing so will make the hook
-be run twice per page build, so avoid doing it for expensive hooks. (As an
-optimisation, if your preprocessor hook is called in a void contets, you
-can assume it's being run in scan mode.)
+Each time the directive is processed, the referenced function (`preprocess`
+in the example above) is called. Whatever the function returns goes onto
+the page in place of the directive. Or, if the function aborts using
+`error()`, the directive will be replaced with the error message.
+
+The function is passed named parameters. First come the parameters set
+in the preprocessor directive. These are passed in the same order as
+they're in the directive, and if the preprocessor directive contains a bare
+parameter (example: `\[[!foo param]]`), that parameter will be passed with
+an empty value.
+
+After the parameters from the preprocessor directive some additional ones
+are passed: A "page" parameter gives the name of the page that embedded the
+preprocessor directive, while a "destpage" parameter gives the name of the
+page the content is going to (different for inlined pages), and a "preview"
+parameter is set to a true value if the page is being previewed.
+
+If `hook` is passed an optional "scan" parameter, set to a true value, this
+makes the hook be called during the preliminary scan that ikiwiki makes of
+updated pages, before begining to render pages. This should be done if the
+hook modifies data in `%links`. Note that doing so will make the hook be
+run twice per page build, so avoid doing it for expensive hooks. (As an
+optimisation, if your preprocessor hook is called in a void context, you
+can assume it's being run in scan mode, and avoid doing expensive things at
+that point.)

 
 Note that if the [[htmlscrubber]] is enabled, html in
 [[ikiwiki/PreProcessorDirective]] output is sanitised, which may limit what
 
 Note that if the [[htmlscrubber]] is enabled, html in
 [[ikiwiki/PreProcessorDirective]] output is sanitised, which may limit what


@@ -189,7 +197,7 @@ ikiwiki, like generating a page, or part of a blog page, or an rss feed, or
 a cgi. This hook allows modifying the variables available on those
 templates. The function is passed named parameters. The "page" and
 "destpage" parameters are the same as for a preprocess hook. The "template"
 a cgi. This hook allows modifying the variables available on those
 templates. The function is passed named parameters. The "page" and
 "destpage" parameters are the same as for a preprocess hook. The "template"

-parameter is a [[cpan HTML::Template]] object that is the template that
+parameter is a [[!cpan HTML::Template]] object that is the template that

 will be used to generate the page. The function can manipulate that
 template object.
 
 will be used to generate the page. The function can manipulate that
 template object.
 


@@ -325,7 +333,7 @@ It can modify the content as desired, and should return the content.
        hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
        hook(type => "formbuilder", id => "foo", call => \&formbuilder);
 
        hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
        hook(type => "formbuilder", id => "foo", call => \&formbuilder);
 

-These hooks allow tapping into the parts of ikiwiki that use [[cpan
+These hooks allow tapping into the parts of ikiwiki that use [[!cpan

 CGI::FormBuilder]] to generate web forms. These hooks are passed named
 parameters: `cgi`, `session`, `form`, and `buttons`. These are, respectively,
 the `CGI` object, the user's `CGI::Session`, a `CGI::FormBuilder`, and a
 CGI::FormBuilder]] to generate web forms. These hooks are passed named
 parameters: `cgi`, `session`, `form`, and `buttons`. These are, respectively,
 the `CGI` object, the user's `CGI::Session`, a `CGI::FormBuilder`, and a


@@ -348,6 +356,58 @@ This hook is called whenever ikiwiki normally saves its state, just before
 the state is saved. The function can save other state, modify values before
 they're saved, etc.
 
 the state is saved. The function can save other state, modify values before
 they're saved, etc.
 

+## renamepage
+
+       hook(type => "renamepage", id => "foo", call => \&renamepage);
+
+This hook is called by the [[plugins/rename]] plugin when it renames
+something. The hook is passed named parameters: `page`, `oldpage`,
+`newpage`, and `content`, and should try to modify the content to reflect
+the name change. For example, by converting links to point to the new page.
+
+### getsetup
+
+       hook(type => "getsetup", id => "foo", call => \&getsetup);
+
+This hooks is not called during normal operation, but only when setting up 
+the wiki, or generating a setup file. Plugins can use this hook to add
+configuration options.
+
+The hook is passed no parameters. It returns data about the configuration
+options added by the plugin. It can also check if the plugin is usable, and
+die if not, which will cause the plugin to not be offered in the configuration
+interface.
+
+The data returned is a list of `%config` options, followed by a hash
+describing the option. For example:
+
+                return
+                       option_foo => {
+                               type => "boolean",
+                               description => "enable foo",
+                               safe => 1,
+                               rebuild => 1,
+                       },
+                       option_bar => {
+                               type => "string",
+                               example => "hello",
+                               description => "what to say",
+                               safe => 1,
+                               rebuild => 0,
+                       },
+
+* `type` can be "boolean", "string", "integer", "pagespec",
+  or "internal" (used for values that are not user-visible). The type is
+  the type of the leaf values;  the `%config` option may be an array or
+  hash of these.
+* `example` can be set to an example value.
+* `description` is a short description of the option.
+* `description_html` is an optional short description, that can contain html
+* `safe` should be false if the option should not be displayed in unsafe
+  configuration methods, such as the web interface. Anything that specifies
+  a command to run, a path on disk, or a regexp should be marked as unsafe.
+* `rebuild` should be true if changing the option will require a wiki rebuild.
+

 ## Plugin interface
 
 To import the ikiwiki plugin interface:
 ## Plugin interface
 
 To import the ikiwiki plugin interface:


@@ -367,7 +427,7 @@ it's not exported, the wise choice is to not use it.
 
 A plugin can access the wiki's configuration via the `%config`
 hash. The best way to understand the contents of the hash is to look at
 
 A plugin can access the wiki's configuration via the `%config`
 hash. The best way to understand the contents of the hash is to look at

-[[ikiwiki.setup]], which sets the hash content to configure the wiki.
+your ikiwiki setup file, which sets the hash content to configure the wiki.

 
 ### %pagestate
 
 
 ### %pagestate
 


@@ -433,7 +493,7 @@ the entire wiki build and make the wiki unusable.
 
 #### `template($;@)`
 
 
 #### `template($;@)`
 

-Creates and returns a [[cpan HTML::Template]] object. The first parameter
+Creates and returns a [[!cpan HTML::Template]] object. The first parameter

 is the name of the file in the template directory. The optional remaining
 parameters are passed to `HTML::Template->new`.
 
 is the name of the file in the template directory. The optional remaining
 parameters are passed to `HTML::Template->new`.
 


@@ -573,12 +633,15 @@ time.
 
 This is the standard gettext function, although slightly optimised.
 
 
 This is the standard gettext function, although slightly optimised.
 

-#### `urlto($$)`
+#### `urlto($$;$)`

 
 Construct a relative url to the first parameter from the page named by the
 second. The first parameter can be either a page name, or some other
 destination file, as registered by `will_render`.
 
 
 Construct a relative url to the first parameter from the page named by the
 second. The first parameter can be either a page name, or some other
 destination file, as registered by `will_render`.
 

+If the third parameter is passed and is true, an absolute url will be
+constructed instead of the default relative url.
+

 #### `targetpage($$)`
 
 Passed a page and an extension, returns the filename that page will be
 #### `targetpage($$)`
 
 Passed a page and an extension, returns the filename that page will be


@@ -601,15 +664,107 @@ PageSpecs glob patterns, but instead only by a special `internal()`
 
 ### RCS plugins
 
 
 ### RCS plugins
 

-ikiwiki's support for [[revision_control_systems|rcs]] also uses pluggable
-perl modules. These are in the `IkiWiki::RCS` namespace, for example
-`IkiWiki::RCS::svn`. 
+ikiwiki's support for [[revision_control_systems|rcs]] is also done via
+plugins. See [[RCS_details|rcs/details]] for some more info.
+
+RCS plugins must register a number of hooks. Each hook has type 'rcs', 
+and the 'id' field is set to the name of the hook. For example:
+       
+       hook(type => "rcs", id => "rcs_update", call => \&rcs_update);
+       hook(type => "rcs", id => "rcs_prepedit", call => \&rcs_prepedit);
+
+#### `rcs_update()`
+
+Updates the working directory with any remote changes.
+
+#### `rcs_prepedit($)`
+
+Is passed a file to prepare to edit. It can generate and return an arbitrary
+token, that will be passed into `rcs_commit` when committing. For example,
+it might return the current revision ID of the file, and use that
+information later when merging changes.
+
+#### `rcs_commit($$$;$$)`
+
+Passed a file, message, token (from `rcs_prepedit`), user, and ip address.
+Should try to commit the file. Returns `undef` on *success* and a version
+of the page with the rcs's conflict markers on failure.
+
+#### `rcs_commit_staged($$$)`
+
+Passed a message, user, and ip address. Should commit all staged changes.
+Returns undef on success, and an error message on failure.
+
+Changes can be staged by calls to `rcs_add, `rcs_remove`, and
+`rcs_rename`.
+
+#### `rcs_add($)`
+
+Adds the passed file to the archive. The filename is relative to the root
+of the srcdir.
+
+Note that this should not check the new file in, it should only
+prepare for it to be checked in when rcs_commit (or `rcs_commit_staged`) is
+called. Note that the file may be in a new subdir that is not yet in
+to version control; the subdir can be added if so.
+
+#### `rcs_remove($)`
+
+Remove a file. The filename is relative to the root of the srcdir.
+
+Note that this should not check the removal in, it should only prepare for it
+to be checked in when `rcs_commit` (or `rcs_commit_staged`) is called. Note
+that the new file may be in a new subdir that is not yet inversion
+control; the subdir can be added if so.
+
+#### `rcs_rename($$)`
+
+Rename a file. The filenames are relative to the root of the srcdir.
+
+Note that this should not commit the rename, it should only
+prepare it for when `rcs_commit` (or `rcs_commit_staged`) is called.
+The new filename may be in a new subdir, that is not yet added to
+version control. If so, the subdir will exist already, and should
+be added to revision control.
+
+#### `rcs_recentchanges($)`
+
+Examine the RCS history and generate a list of recent changes.
+The parameter is how many changes to return.
+
+The data structure returned for each change is:
+
+       {
+               rev => # the RCSs id for this commit
+               user => # name of user who made the change,
+               committype => # either "web" or the name of the rcs,
+               when => # time when the change was made,
+               message => [
+                       { line => "commit message line 1" },
+                       { line => "commit message line 2" },
+                       # etc,
+               ],
+               pages => [
+                       {
+                               page => # name of page changed,
+                               diffurl => # optional url to a diff of changes
+                       },
+                       # repeat for each page changed in this commit,
+               ],
+       }
+
+#### `rcs_diff($)`
+
+The parameter is the rev from `rcs_recentchanges`.
+Should return a list of lines of the diff (including \n) in list
+context, and the whole diff in scalar context.
+
+#### `rcs_getctime($)`

 
 

-Each RCS plugin must support all the `IkiWiki::rcs_*` functions.
-See IkiWiki::RCS::Stub for the full list of functions. It's ok if
-`rcs_getctime` does nothing except for throwing an error.
+This is used to get the page creation time for a file from the RCS, by looking
+it up in the history.

 
 

-See [[RCS_details|rcs/details]] for some more info.
+It's ok if this is not implemented, and throws an error.

 
 ### PageSpec plugins
 
 
 ### PageSpec plugins
 


@@ -624,15 +779,16 @@ IkiWiki::FailReason object if the match fails.
 
 ### Setup plugins
 
 
 ### Setup plugins
 

-The ikiwiki setup file is loaded using a pluggable mechanism. If you
-look at the top of [[ikiwiki.setup]], it starts with 
-'use IkiWiki::Setup::Standard', and the rest of the file is passed to
-that module's import method.
+The ikiwiki setup file is loaded using a pluggable mechanism. If you look
+at the top of a setup file, it starts with 'use IkiWiki::Setup::Standard',
+and the rest of the file is passed to that module's import method.

 
 It's possible to write other modules in the `IkiWiki::Setup::` namespace that
 can be used to configure ikiwiki in different ways. These modules should,
 when imported, populate `$IkiWiki::Setup::raw_setup` with a reference
 
 It's possible to write other modules in the `IkiWiki::Setup::` namespace that
 can be used to configure ikiwiki in different ways. These modules should,
 when imported, populate `$IkiWiki::Setup::raw_setup` with a reference

-to a hash containing all the config items.
+to a hash containing all the config items. They should also implement a
+`gendump` function.

 
 By the way, to parse a ikiwiki setup file, a program just needs to
 
 By the way, to parse a ikiwiki setup file, a program just needs to

-do something like `use IkiWiki::Setup; my %setup=IkiWiki::Setup::load($filename)`
+do something like:
+`use IkiWiki::Setup; my %setup=IkiWiki::Setup::load($filename)`