confirmation

[ikiwiki.git] / doc / todo / Add_a_plugin_to_list_available_pre-processor_commands.mdwn

I've found myself wanting to know which [[plugins]] are switched on so I know which pre-processor commands I can use.  The attached [[patch]] adds a new plugin that generates the list of available plugins. -- [[Will]]

> Good idea, I do see a few problems:
> 
> - preprocessor directives do not necessarily have the same name as the
>   plugin that contains them (for example, the graphviz plugin adds a graph
>   directive). Won't keys `%{IkiWiki::hooks{preprocess}}` work?

>>> Er, yeah - that's a much better solution. :) -- and done

> - "listplugins" is a bit misnamed since it only does preprocessor directives.

>>> Yes.  Initially this was going to list all enabled plugins.  Then when searching
>>> for enabled plugins I changed my mind and decided that a list of pre-processor
>>> directives was more useful.  I'll fix that too. -- changed to `listpreprocessors`

> - comment was copied from version plugin and still mentions version :-)

>>> :-) -- fixed

> - Seems like [[ikiwiki/formatting]] could benefit from including the
>   list.. however, just a list of preprocessor directive names is not
>   the most user-friendly thing that could be put on that page. It would
>   be nice if there were also a short description and maybe an example of
>   use. Seems like the place to include that info would be in the call
>   to `hook()`.
>   (Maybe adding that is more involved than you want to go though..)
> 
> --[[Joey]]

>> Adding a whole new hook for a usage example is more effort than I
>> wanted to go to.  I was thinking of either:

>>> Just to clarify, I meant adding new parameters to the same hook call
>>> that registers the plugin. --[[Joey]]

>>    - Adding a configuration for a wiki directory.  If a matching page is in the
>>      specified wiki directory then the plugin name gets turned into a link to that
>>      page
>>    - Adding configuration for an external URL.  Each plugin name is added as
>>       a link to the plugin name appended to the URL.

>>The first option is easier to navigate and wouldn't produce broken links,
>>but requires all the plugin documentation to be local.  The second option
>>can link back to the main IkiWiki site, but if you have any non-standard
>>plugins then you'll get broken links.
>>
>>Hrm.  After listing all of that, maybe your idea with the hooks is the better
>>solution.  I'll think about it some more. -- [[Will]]

>>> I've also run into this problem with the websetup plugin, and
>>> considered those ideas too. I don't like the external url, because
>>> ikiwiki.info may be out of sync with the version of ikiwiki being used.
>>> (Or maybe it's gone! :-) The first idea is fine, except for the bloat
>>> issue. If turning on listpreprocessors and/or websetup means adding
>>> hundreds of pages (and of kilobytes) to your wiki, that could be an
>>> incentive to not turn them on..
>>>
>>> Hmm.. maybe the thing to do is to use _internal pages for the plugins;
>>> then the individual pages would not be rendered, and your inlines would
>>> still work. Although I don't know how websetup would use it then, and
>>> also they would have to be non-internal for ikiwiki's own docwiki. Hmm.
>>> Maybe these are two different things; one is a set of pages describing
>>> preprocessor directives, and the second a set of pages describing
>>> plugins. They're so closely related though it seems a shame to keep
>>> them separate..
>>> --[[Joey]]

>>> I started implementing the hook based solution, and decided I didn't like
>>> it because there was no nice way to rebuild pages when the preprocessor
>>> descriptions changed.  So instead I assumed that the the [[plugins]] pages
>>> would be moved into the underlay directory.  This plugin then uses an
>>> `inline` directive to include those pages.  You can use the `inline`
>>> parameter to decide if you want to include all the descriptions or
>>> just the titles.  There is also an option to auto-create default/blank
>>> description pages if they are missing (from a template).  As preprocessor
>>> commands don't list unless they have a description page, auto-creation
>>> is enabled by default.
>>>
>>>  There are three new templates that are needed.  These are for:
>>>
>>>  - The auto-created description pages are generated from `preprocessor-description.tmpl`.
>>>  - When only pre-processor names are listed, the `listpreprocessors-listonly.tmpl` template is used.
>>>  - When pre-processor descriptions are included inline, the `listpreprocessors-inline.tmpl` template is used.
>>>
>>> -- [[Will]]

>>>> Just a quick note: pages are only created for pre-processor commands
>>>> that exist when the `refresh` hook is called.  This is before the [[shortcuts]] are
>>>> processed.  However, the list of available pre-processor commands will include
>>>> shortcuts if they have description pages (the list is generated later, after the
>>>> shortcuts have been added).  While this was unplanned, it seems a reasonable
>>>> tradeoff between including all the large number of shortcuts and including none. -- [[Will]]

>>>>>> I think that using an inline is elegant! However, I don't understand
>>>>>> why it has to create stub description pages? I doubt that, if a
>>>>>> directive is missing a page, the stub will be filled out in many
>>>>>> wikis. And it adds a lot of complexity, particularly committing a
>>>>>> bunch of generated pages to revision control when the user just
>>>>>> wants a plugin list seems undesirable.
>>>>>>
>>>>>> Seems to me it could use the inline for pages that exist, and append
>>>>>> to the bottom a generated text for anything that is currently missing.
>>>>>> The generated text could even have a page creation link in it if
>>>>>> you wanted.
>>>>>> --[[Joey]]

>>>>>>> I kinda agree about the page generation.  I don't like mixing an
>>>>>>> inlined and a list though.  Besides which, that ends
>>>>>>> up keeping much of complexity of the page generation because
>>>>>>> the code still has to detect which pages are missing.  I've added
>>>>>>> a patch that uses a list of wikilinks instead.  This way available
>>>>>>> pages get linked correctly, and missing pages get normal creation
>>>>>>> links.  The old patch is still here if you decide you prefer that. -- [[Will]]

    #!/usr/bin/perl
    # Ikiwiki listpreprocessors plugin.
    package IkiWiki::Plugin::listpreprocessors;
    
    use warnings;
    use strict;
    use IkiWiki 2.00;
    
    sub import { #{{{
        hook(type => "getsetup", id => "listpreprocessors", call => \&getsetup);
        hook(type => "checkconfig", id => "listpreprocessors", call => \&checkconfig);
        hook(type => "needsbuild", id => "listpreprocessors", call => \&needsbuild);
        hook(type => "preprocess", id => "listpreprocessors", call => \&preprocess);
    } # }}}
    
    sub getsetup () { #{{{
        return
                plugin => {
                        safe => 1,
                        rebuild => undef,
                },
                preprocessor_description_dir => {
                        type => "string",
                        description => "The ikiwiki directory that contains plugin descriptions.",
                        safe => 1,
                        rebuild => 1,
                },
    } #}}}
    
    my @fullPluginList;
    my @earlyPluginList;
    my $pluginString;
    
    sub checkconfig () { #{{{
        if (!defined $config{plugin_description_dir}) {
            $config{plugin_description_dir} = "ikiwiki/plugin/";
        }
    
        @earlyPluginList = sort( keys %{ $IkiWiki::hooks{preprocess} } );
    } #}}}
    
    sub needsbuild (@) { #{{{
        my $needsbuild=shift;
    
        @fullPluginList = sort( keys %{ $IkiWiki::hooks{preprocess} } );
        $pluginString = join (' ', @earlyPluginList) . " : ". join (' ', @fullPluginList);
    
        foreach my $page (keys %pagestate) {
                if (exists $pagestate{$page}{listpreprocessors}{shown}) {
                        if ($pagestate{$page}{listpreprocessors}{shown} ne $pluginString) {
                                push @$needsbuild, $pagesources{$page};
                        }
                        if (exists $pagesources{$page} &&
                                        grep { $_ eq $pagesources{$page} } @$needsbuild) {
                                # remove state, will be re-added if
                                # the [[!listpreprocessors]] is still there during the
                                # rebuild
                                delete $pagestate{$page}{listpreprocessors}{shown};
                        }
                }
        }
    } # }}}
    
    sub preprocess (@) { #{{{
        my %params=@_;
        
        $pagestate{$params{destpage}}{listpreprocessors}{shown}=$pluginString;
        
        my @pluginlist;
        
        if (! defined $params{generated}) {
                @pluginlist = @fullPluginList;
        } else {
                @pluginlist = @earlyPluginList;
        }
        
        my $result = '<ul class="listpreprocessors">';
        
        foreach my $plugin (@pluginlist) {
                $result .= '<li class="listpreprocessors">[[' . $config{plugin_description_dir} . $plugin . ']]</li>';
        }
        
        $result .= "</ul>";
        
        return IkiWiki::preprocess($params{page}, $params{destpage}, 
                IkiWiki::filter($params{page}, $params{destpage}, $result));
    } # }}}
    
    1

----

Here is the main listpreprocessors plugin. (Note, because this has double
square brackets in the source, it isn't quite displaying correctly - look
at the page source for details.)  New template files follow:

    #!/usr/bin/perl
    # Ikiwiki listpreprocessors plugin.
    package IkiWiki::Plugin::listpreprocessors;
    
    use warnings;
    use strict;
    use Encode;
    use IkiWiki 2.00;
    
    sub import { #{{{
        hook(type => "getsetup", id => "listpreprocessors", call => \&getsetup);
        hook(type => "preprocess", id => "listpreprocessors", call => \&preprocess);
        hook(type => "refresh", id => "listpreprocessors", call => \&refresh);
    } # }}}
    
    sub getsetup () { #{{{
        return
                plugin => {
                        safe => 1,
                        rebuild => undef,
                },
                preprocessor_description_dir => {
                        type => "string",
                        description => "The ikiwiki directory that contains plugin descriptions.",
                        safe => 1,
                        rebuild => 1,
                },
                preprocessor_description_autocreate => {
                        type => "boolean",
                        description => "Should pre-processor command descriptions be automatically created from a template.",
                        safe => 1,
                        rebuild => 1,
                },
    } #}}}
    
    sub gendescription ($$) { #{{{
        my $plugin=shift;
        my $page=shift;
        my $file=$page.".".$config{default_pageext};
        my $template=template("preprocessor-description.tmpl");
        $template->param(page => $page, plugin => $plugin);
        writefile($file, $config{srcdir}, $template->output);
        if ($config{rcs}) {
                IkiWiki::rcs_add($file);
        }
    } #}}}
    
    sub refresh () { #{{{
        eval q{use File::Find};
        error($@) if $@;
    
        if (defined $config{preprocessor_description_autocreate} && ! $config{preprocessor_description_autocreate}) {
                return; # create pages unless they explicitly ask us not to
        }
    
        if (!defined $config{preprocessor_description_dir}) {
                $config{preprocessor_description_dir} = "ikiwiki/plugin/";
        }
        
        my @pluginlist = sort( keys %{ $IkiWiki::hooks{preprocess} } );
        my %pluginpages;
    
        if (@pluginlist) {
                my ($plugin,$page);
                
                foreach $plugin (@pluginlist) {
                        $pluginpages{$plugin} = $config{preprocessor_description_dir} . $plugin;
                }
    
                my %pages;
                foreach my $dir ($config{srcdir}, @{$config{underlaydirs}}, $config{underlaydir}) {
                        find({
                                no_chdir => 1,
                                wanted => sub {
                                        $_=decode_utf8($_);
                                        if (IkiWiki::file_pruned($_, $dir)) {
                                                $File::Find::prune=1;
                                        }
                                        elsif (! -l $_) {
                                                my ($f)=/$config{wiki_file_regexp}/; # untaint
                                                return unless defined $f;
                                                $f=~s/^\Q$dir\E\/?//;
                                                return unless length $f;
                                                return if $f =~ /\._([^.]+)$/; # skip internal page
                                                if (! -d _) {
                                                        $pages{pagename($f)}=$f;
                                                }
                                        }
                                }
                        }, $dir);
                }
    
                if ($config{rcs}) {
                        IkiWiki::disable_commit_hook();
                }
                
                my $needcommit = 0;
                
                while (($plugin,$page) = each %pluginpages) {
                        if (! exists $pages{$page}) {
                                $needcommit = 1;
                                gendescription($plugin,$page);
                        }
                }
                
                if ($config{rcs}) {
                        if ($needcommit) {
                                IkiWiki::rcs_commit_staged(
                                        gettext("automatic pre-processor description generation"),
                                        undef, undef);
                        }
                        IkiWiki::enable_commit_hook();
                }
        }
    } #}}}
    
    sub preprocess (@) { #{{{
        my %params=@_;
        
        if (!defined $config{plugin_description_dir}) {
                $config{plugin_description_dir} = "ikiwiki/plugin/";
        }
        
        my @pluginlist = sort( keys %{ $IkiWiki::hooks{preprocess} } );
        foreach my $plugin (@pluginlist) {
                $plugin = $config{plugin_description_dir} . $plugin;
        }
        my $pluginString = join (' or ', @pluginlist);
        
        my $result = "[[!inline pages=\"$pluginString\" feeds=\"no\" show=0 sort=\"title\"";
        
        if (defined $params{inline}) {
                $result .= ' template=\"listpreprocessors-listonly\" archive="yes"';
        } else {
                $result .= ' template=\"listpreprocessors-inline\" archive="no"';
        }
        
        $result .= "]]";
        
        return IkiWiki::preprocess($params{page}, $params{destpage}, 
                IkiWiki::filter($params{page}, $params{destpage}, $result));
    } # }}}
    
    1

--------

This is what I was using for `listpreprocessors-inline.tmpl`:

    <div class="listpreprocessorsinline">
    
    <div class="inlineheader">
    
    <span class="header">
    <a href="<TMPL_VAR PAGEURL>"><TMPL_VAR TITLE></a>
    </span>
    
    </div><!--.inlineheader-->
    
    <div class="inlinecontent">
    <TMPL_VAR CONTENT>
    </div><!--.inlinecontent-->
    
    </div><!--.listpreprocessorsinline-->

--------

This is what I was using for `listpreprocessors-listonly.tmpl`:

    <p class="listpreprocessors"><a href="<TMPL_VAR PAGEURL>"><TMPL_VAR TITLE></a></p>

--------

This is what I was using for `preprocessor-description.tmpl`:

    The <TMPL_VAR plugin> preprocessor command currently has no description.
    
    Maybe you should edit this page to add one.